Sony SNC-CH120

Manual de instruções Sony SNC-CH120

(1)
  • 4-199-272-13 (1)
    Network Camera
    Installation Manual
    Before operating the unit, please read this manual thoroughly and
    retain it for future reference.
    SNC-CH120/CH220
    Owners Record
    The model and serial numbers are located on the top. Record these numbers
    in the spaces provided below.
    Refer to these numbers whenever you call upon your Sony dealer regarding
    this product.
    Model No. Serial No.
    WARNING
    To reduce a risk of fire or electric shock, do not expose
    this product to rain or moisture.
    To avoid electrical shock, do not open the cabinet. Refer
    servicing to qualified personnel only.
    WARNING
    This installation should be made by a qualified service person and should
    conform to all local codes.
    WARNING
    A readily accessible disconnect device shall be incorporated in the building
    installation wiring.
    WARNING (for Installers only)
    Instructions for installing the equipment on the ceiling or the wall:
    After the installation, ensure the connection is capable of supporting at least
    a force of 50 Newtons (N) downwards.
    CAUTION for LAN port
    For safety reason, do not connect the LAN port to any network devices that
    might have excessive voltage.
    The LAN port of this unit is to be connected only to the devices whose
    power feeding meets the requirements for SELV (Safety Extra Low Voltage)
    and complies with Limited Power Source according to IEC 60950-1.
    Use IEEE802.3af standard compliant devices.
    For customers in the U.S.A.
    This device complies with Part 15 of the FCC Rules. Operation is subject
    to the following two conditions: (1) This device may not cause harmful
    interference, and (2) this device must accept any interference received,
    including interference that may cause undesired operation.
    NOTE: This equipment has been tested and found to comply with the limits
    for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits
    are designed to provide reasonable protection against harmful interference
    when the equipment is operated in a commercial environment. This
    equipment generates, uses, and can radiate radio frequency energy and, if
    not installed and used in accordance with the instruction manual, may cause
    harmful interference to radio communications. Operation of this equipment
    in a residential area is likely to cause harmful interference in which case the
    user will be required to correct the interference at his own expense.
    You are cautioned that any changes or modifications not expressly approved
    in this manual could void your authority to operate this equipment.
    All interface cables used to connect peripherals must be shielded in order to
    comply with the limits for a digital device pursuant to Subpart B or Part 15 of
    FCC Rules.
    For customers in Canada
    This Class A digital apparatus complies with Canadian ICES-003.
    Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
    Canada.
    For the customers in Europe
    The manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-
    ku, Tokyo, Japan.
    The Authorized Representative for EMC and product safety is Sony
    Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany.
    For any service or guarantee matters please refer to the addresses given in
    separate service or guarantee documents.
    For the customers in Europe, Australia and New Zealand
    WARNING
    This is a Class A product. In a domestic environment, this product may cause
    radio interference in which case the user may be required to take adequate
    measures.
    In the case that interference should occur, consult your nearest authorized
    Sony service facility.
    This apparatus shall not be used in the residential area.
    ATTENTION
    The electromagnetic fields at specific frequencies may influence the picture
    of the unit.
    Notes on Use
    Before Use
    If you find condensation when you open the package, turn on the power after
    the condensation disappears.
    Remove the static electricity before operation or when touching the camera.
    Data and security
    You should keep in mind that the images or audio you are monitoring may be
    protected by privacy and other legal rights, and the responsibility for making
    sure you are complying with applicable laws is yours alone.
    Access to the images and audio is protected only by a user name and the
    password you set up. No further authentication is provided nor should you
    presume that any other protective filtering is done by the service. Since
    the service is Internet-based, there is a risk that the image or audio you are
    monitoring can be viewed or used by a third-party via the network.
    SONY IS NOT RESPONSIBLE, AND ASSUMES ABSOLUTELY NO LIABILITY TO YOU
    OR ANYONE ELSE, FOR SERVICE INTERRUPTIONS OR DISCONTINUATIONS OR
    EVEN SERVICE CANCELLATION. THE SERVICE IS PROVIDED AS-IS, AND SONY
    DISCLAIMS AND EXCLUDES ALL WARRANTIES, EXPRESS OR IMPLIED, WITH
    RESPECT TO THE SERVICE INCLUDING, BUT NOT LIMITED TO, ANY OR ALL
    IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
    PURPOSE, OR THAT IT WILL OPERATE ERROR-FREE OR CONTINUOUSLY.
    Always make a test recording, and verify that it was recorded successfully.
    SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT
    LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF FAILURE
    OF THIS UNIT OR ITS RECORDING MEDIA, EXTERNAL STORAGE SYSTEMS OR
    ANY OTHER MEDIA OR STORAGE SYSTEMS TO RECORD CONTENT OF ANY TYPE.
    Always verify that the unit is operating properly before use. SONY WILL NOT
    BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO,
    COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT
    OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE
    WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY
    OTHER REASON WHATSOEVER.
    If you lose data by using this unit, SONY accepts no responsibility for
    restoration of the data.
    Personal information
    The images taken by the system using this device can identify individuals
    and thus they fall under “personal information stipulated in the Act on
    the Protection of Personal Information. Please handle the video data
    appropriately according to law.
    Information recorded using this product may also be “personal information”.
    Upon disposal, transfer, repair, or any other occasion where this product or
    storage media is passed on to a third party, practice due care in its handling.
    Operating or storage location
    Avoid operating or storing the camera in the following locations.
    Extremely hot or cold places (Operating temperature: 10°C to +50°C [14°F to
    122°F])
    Exposed to direct sunlight for a long time, or close to heating equipment (e.g.,
    near heaters)
    Close to sources of strong magnetism
    Close to sources of powerful electromagnetic radiation, such as radios or TV
    transmitters
    Locations subject to strong vibration or shock
    Humid or dusty locations
    Locations exposed to rain
    Locations under the influence of fluorescent light or reflection of a window
    Under an unsteady light (The image will flicker.)
    Ventilation
    To prevent heat buildup, do not block air circulation around the camera.
    Power supply
    The power of this model is supplied by network cable.
    Use the network cable UTP, category-5.
    Damage to the network cable may result in fire or electric shock.
    Transportation
    Always turn off the power when carrying.
    When transporting the camera, repack it as originally packed at the factory or
    in materials of equal quality.
    Cleaning
    Use a blower to remove dust from the lens.
    Use a soft, dry cloth to clean the external surfaces of the camera. Stubborn
    stains can be removed using a soft cloth dampened with a small quantity of
    detergent solution, then wipe dry.
    Do not use volatile solvents such as alcohol, benzene or thinners as they may
    damage the surface finishes.
    Note on laser beams
    Laser beams may damage image sensors. You are cautioned that the surface of image
    sensors should not be exposed to laser beam radiation in an environment where a laser
    beam device is used.
    Phenomena Specific to Image Sensors
    The following phenomena that may occur in images are specific to image
    sensors. They do not indicate a malfunction.
    White flecks
    Although the image sensors are produced with high-precision technologies, fine
    white flecks may be generated on the screen in rare cases, caused by cosmic rays,
    etc.
    This is related to the principle of image sensors and is not a malfunction.
    The white flecks especially tend to be seen in the following cases:
    - when operating at a high environmental temperature
    - when you have raised the gain (sensitivity)
    - when using the slow shutter
    Aliasing
    When fine patterns, stripes, or lines are shot, they may appear jagged or flicker.
    About the imaging conditions
    When Auto Iris is set to On, resolution may be unsatisfactory. In this case, set
    Auto Iris to Off.
    About the Supplied Manuals
    Installation Manual (this document)
    This Installation Manual describes the names and functions of parts and controls
    of the Network Camera, gives connection examples and explains how to set up
    the camera. Be sure to read the Installation Manual before operating.
    User’s Guide (stored in the CD-ROM)
    The User’s Guide describes how to set up the camera and how to control the
    camera via a Web browser.
    After installing and connecting the camera correctly, operate referring to this
    User’s Guide.
    Using the CD-ROM Manuals
    The supplied CD-ROM disc includes the Users Guides for this unit in PDF format.
    Preparations
    The Adobe Reader Version 6.0 or higher must be installed on your computer in
    order to use the guides stored in the CD-ROM disc.
    Note
    If Adobe Reader is not installed, it may be downloaded from the following URL:
    http://www.adobe.com/
    Reading the manual in the CD-ROM
    1 Insert the CD-ROM in your CD-ROM drive.
    A cover page appears automatically in your Web browser.
    If it does not appear automatically in the Web browser, double-click on the
    index.htm file on the CD-ROM.
    2 Select and click on the manual that you want to read.
    This opens the PDF file of the manual.
    Clicking an item in the Table of Contents allows you jump to the relevant
    page.
    Notes
    The files may not be displayed properly, depending on the version of Adobe
    Reader. In this case, install the latest version, which you can download from
    the URL mentioned in “Preparations above.
    If you have lost or damaged the CD-ROM, you can purchase replacement.
    Contact your Sony service representative.
    Adobe and Acrobat Reader are trademarks of Adobe Systems Incorporated in the
    United States and/or other countries.
    Location and Function of Part
    Front
    Lens
    A vari-focal lens is mounted as standard equipment.
    Focus ring
    Turn this ring toward N (near) to focus on a closer object. Turn it toward F
    (infinite) to focus on a farther object.
    Zoom ring
    Turn this ring toward T for telephoto, or toward W for wide-angle.
    Tripod screw hole
    Use this screw hole when attaching the camera
    to a tripod (screw: 1/4”, 20 UNC). You can attach a
    tripod to either the top or bottom of the camera.
    Caution
    Use the mounting screw whose length is 4.5 mm (
    3
    / inch) – 7 mm
    (
    9
    / inch) only. Use of other screws may cause improper mounting and
    damage parts inside the camera.
    Rating Label
    This label shows the name of device and its electric rating.
    Lens connector (4-pin socket)
    Supplies power and control signals to an auto-iris lens.
    Rear
    I/O (Input/Output) port
    This cable is provided with a sensor input and an alarm output.
    The wires of the cable control the following signals.
    PinNo. Signal
    1 Alarm output 1–
    2 Alarm output 1+
    3 Sensor input– (GND)
    4 Sensor input+
    For details on each function and required settings, see the Users
    Guide stored in the supplied CD-ROM.
    For the wiring, see “Connecting the I/O cable.
    LAN network port (RJ-45)
    Use the network cable (UTP, category-5) for network communications
    and PoE* power supply.
    See “Connect to the Network” for connection.
    (* PoE: The acronym for Power over Ethernet. IEEE 802.3af standard
    compliant devices.)
    Easy Focus button
    Press this button to automatically adjust the focus.
    To load the default setting, press and hold this button for 4 seconds.
    Fall-prevention wire rope mounting screw hole
    When installing the camera to the ceiling or the wall, secure the supplied
    wire rope to this hole using the supplied screw.
    NETWORK indicator (Green/Orange)
    The indicator lights up or flashes when the camera is connected to the
    network. The indicator is off when the camera is not connected to the
    network. When 100BASE-TX is connected, the indicator turns green.
    When 10BASE-T is connected, the indicator turns orange.
    Reset switch
    To reset the camera to the factory default settings, turn on the power to
    the camera while holding down this switch with a pointed object.
    POWER indicator (Green)
    When the power is supplied to the camera, the camera starts checking
    the system. If the system is normal, this indicator lights up.
    NTSC/PAL switch
    Switching the video output.
    MONITOR output jack
    Output the composite video signal from the camera.
    Monitor out is used when you adjust the angle of view. Be sure to set
    monitor out to on when you use it. Set it to off and disconnect the video
    cable when you do not use it.
    For details on system setting, see the User’s Guide.
    Notes
    Do not connect to the video cable until the POWER indicator lights
    up.
    Be aware that the system performance may be influenced, if
    monitor out is set to on. Be sure to set it to off and disconnect the
    video cable when you do not use it.
    (continued on the reverse side)
    2010 Sony Corporation Printed in China
    U1/4”, 20 UNC
    = 4.5 mm - 7 mm
    (ISO standard) (with the
    screws fastened)
Sony SNC-CH120

Precisa de ajuda?

Número de perguntas: 0

Você tem alguma dúvida sobre o Sony SNC-CH120 ou precisa de ajuda? Faça sua pergunta aqui. Forneça uma descrição clara e abrangente do problema e sua pergunta. Quanto mais detalhes você fornecer para seu problema e pergunta, mais fácil será para outros proprietários de Sony SNC-CH120 responderem adequadamente à sua pergunta.

Veja o manual do Sony SNC-CH120 aqui, de graça. Este manual está na categoria Câmeras de vigilância e foi avaliado por 1 pessoas com uma média de 7. Este manual está disponível nos seguintes idiomas: Inglês. Você tem alguma dúvida sobre o Sony SNC-CH120 ou precisa de ajuda? Faça a sua pergunta aqui

Sony SNC-CH120 especificações

Geral
Marca Sony
Modelo SNC-CH120
Produto Câmara de vigilância
EAN 132017628097, 27242260580
Língua Inglês
Tipo de arquivo PDF
Vídeo
Formatos de vídeo H.264
Resolução Máxima 1329 x 1049
Taxa de fotogramas 20/30, 30
Câmera
Ângulo de visão (horizontal) 96.5
Velocidade do obturador 1 - 1/10000
Equilíbrio dos brancos Auto, Manual
Iluminação mínima 0.5
Sensor de imagem
Tipo de sensor de imagem CMOS
Sistema de lente
Comprimento focal 2.8 - 8
Zoom óptico 2.9
Rede
Protocolos de rede suportados IPv4, IPv6, TCP, UDP, ARP, ICMP, IGMP, HTTP, HTTPS, FTP (client only), SMTP, DHCP, DNS, NTP, RTP/RTCP, RTSP, SNMP (MIB-2)
Wi-Fi
Outras características
Alimentação PoE (IEEE802.3af compliant)
Dimensões do produto (CxLxA) 72 x 63 x 197
Sistemas operativos compatíveis Microsoft Windows XP/ Vista(32bit)/ 7(32bit)
F-number (abertura relativa) F1.2, F1.9
Gestão de energia
Power over Ethernet (PoE) -
Consumo de energia (típico) 5
Conectividade
Interface -
Modo noturno
Versão noturna
Pesos e dimensões
Peso do produto 550
Condições ambientais
Temperatura de funcionamento -10 - 50
Limite de temperaturas (armazenamento) -20 - 60
null
Requisitos do sistema
Velocidade de processador mínima Intel Core2 Duo 2 GHz
Memória RAM mínima 1024

Perguntas Frequentes

Abaixo, encontrará as perguntas mais frequentes sobre Sony SNC-CH120 .

A sua pergunta não está na lista? Faça a sua pergunta aqui

ManualPDF.pt

Procurando um manual? ManualPDF.pt garante que encontrará o manual que está a procurar rapidamente. O nosso banco de dados contém mais de 1 milhão de manuais em PDF de mais de 10.000 marcas. Todos os dias adicionamos os manuais mais recentes para que sempre encontre o produto que procura. É muito simples: basta digitar o nome da marca e o tipo de produto na barra de pesquisa e pode visualizar instantaneamente o manual de sua escolha online gratuitamente.

ManualPDF.pt

© Copyright 2020 ManualPDF.pt. Todos os direitos reservados.

Utilizamos cookies para assegurar que lhe fornecemos a melhor experiência na nossa página web. Se continuar a utilizar esta página pressupomos que está feliz por a utilizar.

Ler mais