•Automatic white balance tracking and adjustment (ATW/ATW-PRO)
•Manual setting of the camera direction – panning, tilting and rotating
•Vari-focal auto iris lens as standard equipment. The focal length of the
lens is from 2.8 mm to 10 mm.
•High quality CCD and clear dome cover enable high sensitivity.
•Wide dynamic range (128 times wider than normal) using DynaView
•24 V AC / 12 V DC power supply system
•3 video compression formats (video codecs) available: JPEG, MPEG4 and
•Single codec mode and dual codec mode switchable
•Up to 20 users can access an image of a camera simultaneously.
•You can monitor a high-quality live image of 30 frames per second maximum
(SNC-DF50N) and 25 frames per second maximum (SNC-DF50P).
•Date/time can be superimposed on the image.
Notes on Use
Operating or storage location
Do not shoot an extremely bright object (an illumination, the sun, etc.). Also,
avoid operating or storing the camera in the following locations, as these
can be a cause of a malfunction.
•Extremely hot or cold places (Operating temperature: –10 °C to
+50 °C [14 °F to 122 °F])
•Exposed to direct sunlight for a long time, or close to heating equipment
(e.g., near heaters)
•Close to sources of strong magnetism
•Close to sources of powerful electromagnetic radiation, such as radios or
•Locations subject to strong vibration or shock
•Humid or dusty locations
•Locations exposed to rain
•Locations under the influence of fluorescent light or reflection of a window
•Under an unsteady light (the image will flicker.)
To prevent heat buildup, do not block air circulation around the camera.
When transporting the camera, repack it as originally packed at the factory
or in materials of equal quality.
•Use a blower to remove dust from the lens.
•Use a soft, dry cloth to clean the external surfaces of the camera.
Stubborn stains can be removed using a soft cloth dampened with a
small quantity of detergent solution, then wipe dry.
•Do not use volatile solvents such as alcohol, benzene or thinners as they
may damage the surface finishes.
Note on laser beams
Laser beams may damage a CCD. You are cautioned that the surface of a
CCD should not be exposed to laser beam radiation in an environment where
a laser beam device is used.
Typical CCD Phenomena
The following phenomena may appear on the monitor screen while you are
using a CCD color video camera. These phenomena stem from the high
sensitivity of the CCD image sensors, and do not indicate a fault within the
A “smear” may appear to extend vertically from very bright subjects, as
This phenomenon is common to CCD imaging elements using an interline
transfer system, and is caused when electric charge induced by infrared
radiation deep within the photo sensor is transferred to the resistors.
When shooting fine stripes, straight lines or similar patterns, the lines may
become slightly jagged.
A CCD image sensor consists of an array of individual picture elements
(pixels). A malfunctioning sensor element will show up
as a single pixel blemish in the image. This is generally not a problem.
When you shoot a poorly illuminated object at a high temperature, small
white dots may appear all over the entire screen image.
Video monitor screen
Pale vertical smear
Very bright subject (such as an
electric lamp, fluorescent lamp,
sunlight, or strong reflected light)
About the Supplied Manuals
Names of Manuals
The following manuals are supplied with this unit.
Installation Manual (this document)
The Installation Manual describes the names and functions of the parts of
the camera, the installation and connections of the camera, etc. Be sure to
read it before operating the camera.
User’s Guide (stored in the CD-ROM)
The User’s Guide describes the setup of the camera and the operations
from the Web browser.
To open the User’s Guide, see “Using the CD-ROM Manuals” below.
Using the CD-ROM Manuals
The supplied CD-ROM disc includes the User’s Guides for this unit
(Japanese, English, French, German, Spanish, Italian and Chinese
versions) in PDF format.
The Adobe Reader Version 6.0 or higher must be installed on your
computer in order to use the User’s Guide stored in the CD-ROM disc.
If Adobe Reader is not installed, it may be downloaded from the following
Reading the manual in the CD-ROM
1Insert the CD-ROM in your CD-ROM drive.
A cover page appears automatically in your Web browser.
If it does not appear automatically in the Web browser, double-click on
the index.htm file on the CD-ROM.
2Select and click on the manual that you want to read.
This opens the PDF file of the manual.
Clicking an item in the Table of Contents allows you jump to the relevant
•The files may not be displayed properly, depending on the version of
Adobe Reader. In this case, install the latest version, which you can
download from the URL mentioned in “Preparations” above.
•If you have lost or damaged the CD-ROM, you can purchase
replacement. Contact your Sony service representative.
Adobe, Acrobat and Acrobat Reader are trademarks of Adobe Systems
Incorporated in the United States and/or other countries.
Location and Function of Part
The figure shows the camera without the dome casing and the slit cover.
1Indoor wiring slit (knockout type)
When you wire indoors, cut this part with a nipper or similar and feed the
cable through it.
Take care not to trap the cable between the camera and the ceiling or
the wall. If the cable is trapped, it may cause a fire or electric shock due
2Camera head holder
4Lens ring fixing screw
Loosen this screw before adjusting the zoom and focus, then tighten it to
fix the lens position. The screw can be inserted at one of three points.
Turn this ring to adjust the field of view.
Turn this ring to adjust the focus.
7Dome casing screw hole
8LAN indicator (green)
This indicator flashes in green when the camera is connected to the
network. The indicator goes off when the camera is not connected to the
9POWER indicator (green)
When the power is supplied to the camera, the camera starts checking
the system. If the system is normal, this indicator lights up.
To reset the camera to the factory default settings, hold down this switch
with a point and supply the power to the camera.
qaCamera installation hole (2 positions)
qsCamera head fixing screw
First loose the screw and face the camera head to the desired direction,
then tighten the screw to fix it.
qdMONITOR output jack
Connect to a video input connector of a monitor. You can adjust the
camera while looking at the image on the monitor. After adjusting the
camera, disconnect the cable.
Pin No.Pin name
1Sensor In +
2Sensor In – (GND)
3Alarm Out 1 +
4Alarm Out 1 –
5Alarm Out 2 +
6Alarm Out 2 –
I / O
qfLAN port (RJ45)
Connect to a hub or computer on the 10BASE-T or 100BASE-TX
network using a network cable (UTP, category 5).
qgI/O (Input/Output) port
This port is provided with a sensor input and two alarm outputs.
Pin assignment of I/O port
For details on each function and required settings, see the User’s
Guide stored in the supplied CD-ROM.
For wiring, see “Connecting the I/O port”.
qh12V DC/ 24V AC (power input) connector
Connect to a 12V DC or 24V AC power supply system with the
supplied AC power cord.
qj5 (line output) jack (minijack, monaural)
Connect a commercially available speaker system with the built-in
qkm(microphone input) jack (minijack, monaural)
Connect a commercially available microphone.
qlT(video output) connector (BNC type)
Outputs a composite video signal. Connect to a composite video
input connector of a video monitor, VCR, etc. Use the supplied
monitor cable for connection.
w;Screw hole for wire rope
Monitoring the Camera Image
Install and connect the camera properly following the instructions in this
manual, then operate the camera referring to the User’s Guide
contained in the supplied CD-ROM.
(continued on the reverse side)
Precisa de ajuda?
Número de perguntas: 0
Você tem alguma dúvida sobre o Sony SNC-CS50N ou precisa de ajuda? Faça sua pergunta aqui. Forneça uma descrição clara e abrangente do problema e sua pergunta. Quanto mais detalhes você fornecer para seu problema e pergunta, mais fácil será para outros proprietários de Sony SNC-CS50N responderem adequadamente à sua pergunta.
Sobre a Sony SNC-CS50N
Veja o manual do Sony SNC-CS50N aqui, de graça. Este manual está na categoria Câmeras de vigilância e foi avaliado por 1 pessoas com uma média de 9.5. Este manual está disponível nos seguintes idiomas: Inglês. Você tem alguma dúvida sobre o Sony SNC-CS50N ou precisa de ajuda? Faça a sua pergunta aqui