Vivanco UR 81

Manual de instruções Vivanco UR 81

(7)
  • UR81 Universal Controller
    Vivanco GmbH, Ewige Weide 15, D-22926 Ahrensburg, e-Mail: hotline@vivanco.de 1
    ( GB ) Operating Instructions -> 1
    ( D ) Bedienungsanleitung -> 2
    ( F ) Notice d'emploi -> 3
    ( E ) Instrucciones de uso -> 4
    ( I ) Istruzioni per l’uso->6
    ( NL ) Gebruiksaanwijzing -> 7
    ( PL ) Instrukcja obsługi -> 8
    ( P ) Instruções de operação -> 9
    (DK) Betjeningsvejledning -> 11
    (S) Bruksanvisning -> 12
    (RUS)
       ->
    13
    (GR)  ->15
    (TR)
    Kullanma talimatı -> 16
    (CZ)
    Návod k obsluze -> 17
    (SK) Návod na obsluhu-> 18
    (H) Kezelési utasítása -> 20
    (GB) Instructions
    Inserting the batteries
    Open the battery flap on the back of the
    remote control, press the tongue lightly
    downwards, then insert 2 alkaline AAA
    batteries. Check that the polarity markings on
    the batteries and in the battery compartment
    are correctly lined up (+=+), then close the flap
    carefully. – Always use undamaged batteries.
    Adapting to a device (e.g. TV or DVB Set
    Top Box (or SAT/Cable) etc.
    In order to control e.g. your TV or DVB you
    must adapt or set the remote control to it.
    There are two ways of doing so: direct control
    code entry or code search.
    If your UR81 does not understand you it blinks
    and you can then repeat the entry. Each
    understood entry is confirmed by LED blinking
    briefly.
    Direct control code entry using the
    enclosed list
    Example: setting to control a Panasonic
    television set:
    1. The enclosed list gives, for example, the
    Panasonic Code 153.
    2. To prepare code entry, briefly press the
    SET button, and then the TV-button, until the
    Powerkey lamp/LED lights constantly.
    3. Then press the number buttons (e.g. 1 5 3)
    in sequence.
    4. Once the numbers have been entered the
    button lamp goes out and the remote control is
    ready to control your appliance.
    5. Finally, test the control code setting by
    trying to control your television set. If it does
    not work at all or not correctly try a different
    code from the list or the code search (see
    below).
    Code search
    If the brand of your appliance is not in the list
    or none of the codes given fits, we recommend
    a code search.
    Manual code search
    1. Switch on the appliance to be controlled.
    Program is running.
    2. To prepare the code search, briefly press
    the SET button and then additionally a
    appliance button, e.g. the TV or DVB button,
    until the lamp (LED) lights constantly.
    3. Then point the remote control at the
    appliance to be controlled.
    4. Briefly press the ON/OFF (appliance
    on/off) button once. The lamp (LED) blinks.
    5. Press the ON/OFF (appliance on/off)
    button repeatedly, approx. every second, until
    appliance, reacts. - If you notice the reaction of
    your appliance too late and the next code has
    already been emitted you can go back by
    pressing SET and then ON/OFF again. If your
    appliance has switched itself off you must
    switch it back on again, e.g. on the appliance
    or with the original remote control, to continue
    searching. - When your appliance reacts you
    can also try out other buttons without
    interrupting the search. If some buttons do not
    work properly, simply continue searching with
    ON/OFF.
    6. When your appliance reacts correctly,
    press the appliance button e.g. TV and end the
    search. The lamp (LED) goes out.
    - The search stops after approx. 30 seconds of
    inactivity.
    Automatic code search
    Your remote control finds the correct settings
    almost automatically in seconds:
    1. Switch on the appliance to be controlled so
    that you can watch a TV program.
    2. To start the code search, press the SET
    button, and then additionally the appliance
    button e.g. TV or DVB, for more than 3
    seconds until the Power-key lamp (LED) starts
    to blink.
    3. Then point the remote control at the
    appliance to be controlled while the remote
    control emits a different ON/OFF signal every
    2 seconds.
    4. When your appliance reacts, press any
    button, except SET, to end the search.If you
    ended the search too late, continue to search
    using the Manual Code Search (see above).
    5. Finally, test the control code setting by
    trying to control your appliance. If it does not
    work correctly, please try the code search
    again. The code search then begins with the
    next code in the sequence. - Remember to
    switch your appliance back on again if you
    wish to continue searching.
    Code identification
    You can read off the 3-digit codes you have
    set at any time:
    1. Press the appliance button of the appliance
    whose code you want to read off, e.g. TV.
    2. Press the SET button and additionally 1,2
    or 3, depending on the part of the code you
    want to read off. For example, if you press
    SET+1 and the code 153 (in this example) has
    been set, the lamp blinks once after SET+1 is
    released to show that the hundred figure is 1.
    All you have to do is count. The ten figure is
    indicated after SET+2 is released, e.g. it blinks
    5 times for the 5 in 153. The one figure is
Vivanco UR 81

Precisa de ajuda?

Número de perguntas: 0

Você tem alguma dúvida sobre o Vivanco UR 81 ou precisa de ajuda? Faça sua pergunta aqui. Forneça uma descrição clara e abrangente do problema e sua pergunta. Quanto mais detalhes você fornecer para seu problema e pergunta, mais fácil será para outros proprietários de Vivanco UR 81 responderem adequadamente à sua pergunta.

Veja o manual do Vivanco UR 81 aqui, de graça. Este manual está na categoria Telecomandos e foi avaliado por 7 pessoas com uma média de 6.5. Este manual está disponível nos seguintes idiomas: Português, Espagnol, Inglês, Holandês, Alemão, France, Italien, Suédois, Dinamarquês, Polonês, Turco, Eslovaco, Húngaro. Você tem alguma dúvida sobre o Vivanco UR 81 ou precisa de ajuda? Faça a sua pergunta aqui

Vivanco UR 81 especificações

Marca Vivanco
Modelo UR 81
Produto Telecomando
Língua Português, Espagnol, Inglês, Holandês, Alemão, France, Italien, Suédois, Dinamarquês, Polonês, Turco, Eslovaco, Húngaro
Tipo de arquivo PDF

Manuais de produtos relacionados

Telecomando Vivanco

Perguntas Frequentes

Abaixo, encontrará as perguntas mais frequentes sobre VivancoUR 81 .

A sua pergunta não está na lista? Faça a sua pergunta aqui

ManualPDF.pt

Procurando um manual? ManualPDF.pt garante que encontrará o manual que está a procurar rapidamente. O nosso banco de dados contém mais de 1 milhão de manuais em PDF de mais de 10.000 marcas. Todos os dias adicionamos os manuais mais recentes para que sempre encontre o produto que procura. É muito simples: basta digitar o nome da marca e o tipo de produto na barra de pesquisa e pode visualizar instantaneamente o manual de sua escolha online gratuitamente.

ManualPDF.pt

© Copyright 2020 ManualPDF.pt. Todos os direitos reservados.

Utilizamos cookies para assegurar que lhe fornecemos a melhor experiência na nossa página web. Se continuar a utilizar esta página pressupomos que está feliz por a utilizar.

Ler mais